Show simple item record

dc.contributor.authorMarvin, Christopher H.en_US
dc.date.accessioned2009-06-15T17:00:41Z
dc.date.available2009-06-15T17:00:41Z
dc.date.issued1990-06-15T17:00:41Z
dc.identifier.urihttp://hdl.handle.net/10464/1616
dc.description.abstractSeveral automated reversed-phase HPLC methods have been developed to determine trace concentrations of carbamate pesticides (which are of concern in Ontario environmental samples) in water by utilizing two solid sorbent extraction techniques. One of the methods is known as on-line pre-concentration'. This technique involves passing 100 milliliters of sample water through a 3 cm pre-column, packed with 5 micron ODS sorbent, at flow rates varying from 5-10 mUmin. By the use of a valve apparatus, the HPLC system is then switched to a gradient mobile phase program consisting of acetonitrile and water. The analytes, Propoxur, Carbofuran, Carbaryl, Propham, Captan, Chloropropham, Barban, and Butylate, which are pre-concentrated on the pre-column, are eluted and separated on a 25 cm C-8 analytical column and determined by UV absorption at 220 nm. The total analytical time is 60 minutes, and the pre-column can be used repeatedly for the analysis of as many as thirty samples. The method is highly sensitive as 100 percent of the analytes present in the sample can be injected into the HPLC. No breakthrough of any of the analytes was observed and the minimum detectable concentrations range from 10 to 480 ng/L. The developed method is totally automated for the analysis of one sample. When the above mobile phase is modified with a buffer solution, Aminocarb, Benomyl, and its degradation product, MBC, can also be detected along with the above pesticides with baseline resolution for all of the analytes. The method can also be easily modified to determine Benomyl and MBC both as solute and as particulate matter. By using a commercially available solid phase extraction cartridge, in lieu of a pre-column, for the extraction and concentration of analytes, a completely automated method has been developed with the aid of the Waters Millilab Workstation. Sample water is loaded at 10 mL/min through a cartridge and the concentrated analytes are eluted from the sorbent with acetonitrile. The resulting eluate is blown-down under nitrogen, made up to volume with water, and injected into the HPLC. The total analytical time is 90 minutes. Fifty percent of the analytes present in the sample can be injected into the HPLC, and recoveries for the above eight pesticides ranged from 84 to 93 percent. The minimum detectable concentrations range from 20 to 960 ng/L. The developed method is totally automated for the analysis of up to thirty consecutive samples. The method has proven to be applicable to both purer water samples as well as untreated lake water samples.en_US
dc.language.isoengen_US
dc.publisherBrock Universityen_US
dc.subjectTrace elements in wateren_US
dc.subjectCarbamates.en_US
dc.subjectPesticides.en_US
dc.subjectSorbents.en_US
dc.subjectHigh performance liquid chromatography.en_US
dc.subjectTrace elements in water.en_US
dc.titleThe development of automated methods for the determination of trace concentrations of carbomate pesticides in water using solid sorbent pre-concentration methods and high performance liquid chromatography /en_US
dc.typeElectronic Thesis or Dissertationen_US
dc.degree.nameM.Sc. Chemistryen_US
dc.degree.levelMastersen_US
dc.contributor.departmentDepartment of Chemistryen_US
dc.degree.disciplineFaculty of Mathematics and Scienceen_US
refterms.dateFOA2021-08-07T02:33:31Z


Files in this item

Thumbnail
Name:
Brock_Marvin_Christopher_1990.pdf
Size:
13.24Mb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record